訂單發貨回覆正常, 3-5工作天發貨。滿$50包本地平郵,滿$500 包順豐速遞。
特價

Arduino UNO R3 開發板 原裝正版 ATmeg328P

$198.00 $188.00

貨號: A0004-1 分類:

商品說明

Arduino Uno R3

UNO  R3是一款開源控制器(MCU),提供14個數字輸入/輸出引腳(其中6個可用作PWM輸出),6個模擬輸入,16 MHz 石英晶體,USB連接,電源插孔,ICSP接頭和復位按鈕。 它包含支持微控制器所需的一切;

只需使用USB 連接到電腦,或使用AC到DC 配配器或電池供電即可開始使用。您可以修改您的Arduino程式,而不必擔心做錯,最糟糕的情況是重新開始,可任意發揮你的創意。

開發軟件Arduino IDE可在本站免費下載,下載程序簡單、方便。程式內附多個範例程式,可簡單地使用傳感器、各式各樣的電子元件連接(如:LED燈、蜂鳴器、按鍵、光敏電阻等等),做出各種各樣有趣的作品。

規格:

  • 核心芯片: ATmega 328P
  • 運行頻率 16MHz
  • 內存容量 32KB (0.5KB啟動容量)
  • SRAM 2KB
  • EEPROM 1KB
  • 工作電壓 5V
  • 輸入電壓 7-9V (建議)
  • 輸入電壓 6-20V (極限)
  • 引腳(PIN) 14Pin (其中6條支持PWM)
  • 模擬引腳(Analog PIN) 6Pin (輸入)
  • 外部接口 DC直流 / USB Type B

 


Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your Uno without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

Specification:

  • Microcontroller:ATmega328P
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limit) 6-20V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • PWM Digital I/O Pins 6
  • Analog Input Pins 6
  • DC Current per I/O Pin 20 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328P)
  • EEPROM 1 KB (ATmega328P)
  • Clock Speed 16 MHz
  • LED_BUILTIN 13
  • Length 68.6 mm
  • Width 53.4 mm
  • Weight 25 g

 

軟件 & 教學/ Software & Tutorial:

www.arduino.cc

www.arduino.cc/en/main/arduinoBoardUno

www.instructables.com/id/Arduino-Projects/

yfrobot.com/portal.php

 

 

 

Size

cdn-shop.adafruit.com/datasheets/arduino_hole_dimensions.pdf

 

 

額外資訊

顏色

ORANGE, COPPER

商品評價

目前沒有評價。

只有註冊並且購買過商品的顧客才能撰寫評價。