商品說明
Photo Interrupter Module Keyes KY-010 for Arduino, will trigger a signal when light between the sensor’s gap is blocked.
THe KY-010 Photo Interrupter module consists of an optical emitter/detector in the front and two resistors (1 kΩ and 33 Ω) in the back. The sensor uses a beam of light between de emitter an detector to check if the path between both is being blocked by an opaque object.
Operating Voltage |
3.3 ~ 5V |
Dimensions |
18.5mm x 15mm [0.728in x 0.591in] |
Connect the power line (middle) and ground (left) to +5V and GND respectively. Connect signal (S) to pin 3 on the Arduino.
KY-010 |
Arduino |
– (left) |
GND |
middle |
+5V |
S (right) |
Pin 3 |

商品評價
目前沒有評價。