受晶片供應影響,PI / micro:bit / Jetson供貨及價格較為浮動,敬請見諒。

Kitronik MI:power board for the BBC Micro:bit V2

$68.00

已售完

貨號: 5610-V2 分類: , , 標籤: ,

描述

The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and features a built-in buzzer and 3V coin cell holder. This latest version has been redesigned to fit both the the V1 and V2 micro:bit.

When assembled, the MI:power board is connected directly to the 3V, GND and P0 connections on the micro:bit. The 3V and GND connections provide power to the micro:bit and the built-in buzzer is connected to P0, which is the default output pin when using the audio functions in the Block Editor software.

The board has an easy to access on/off switch, which makes it easy to turn a project on and off, rather than have to disconnect the power supply from the BBC micro:bit.

Once the unit is assembled and attached to the BBC micro:bit the mechanical fixings prevent the battery from being removed unless you use a screwdriver, so whatever the use, the battery will remain safely in place.

Note:

  • Spacers, fixings and a battery are all provided.
  • BBC micro:bit is NOT included, they are available separately here.
  • This accessory requires some mechanical assembly.
  • No Soldering required.
  • Works with micro:bit V1 and micro:bit V2.

Features:

  • Power your BBC micro:bit from a stylish PCB.
  • Break free from the tether to the computer and take your project mobile.
  • On-Board buzzer.
  • Easy access on/off switch.
  • Great for micro:bit mood badges, to allow your micro:bit to become a handheld remote control, and much more.
  • This accessory is supplied with spacers, fixings and a battery.
  • No soldering required.

Contents:

  • 1 x MI:power board for the BBC micro:bit.
  • 3 x Counter Sunk M3 Machine Screws.
  • 3 x M3 Hex Full Width Nuts.
  • 3 x Plastic Spacers.
  • 1 x CR2032 3V Coin Cell.

Project Ideas Video:

 

Free Laser Cutter DXF Files:

We’ve also created some free downloadable resources for you to use with your laser cutter. Included in the downloads are DXF files for designs that fit directly to the Mi:power board that allows you to attach it to your belt, wrist strap, lanyard, stand it on your desk or on a design that can be placed in your garden or a plant pot. You can see some examples of these in the images below.

Dimensions:

  • Length: 51mm.
  • Width: 42mm.
  • Height: 6mm.

Video:

 

Requires:

Resources:

商品評價

目前沒有評價。

只有註冊並且購買過商品的顧客才能撰寫評價。